TRU-B-1504-GA Internal Centering Sleeves for Aluminum Wheels, Steer Axles
TRU-BALANCE
$158.76
Internal Centering Sleeves for Aluminum Wheels, Steer Axles
Specifications:
-
Aluminum Wheels Only
-
Steer Axles Only
-
1.25" Hole Diameter - 1/2" Hole Depth
-
Sold in sets of 6 (3 per wheel)
Features:
-
Stays On Wheels
-
Zinc Plated To Resist Corrosion
-
Sold In Sets of 6 Per Axle
-
Machined from Solid Steel Bar Stock
-
Threaded Inside for Accurate Alignment
Supported Brake Drums:
Arvin Meritor |
Gunite |
Conmet |
Webb |
Wheel Centrifuse |
53-123448-002 |
3573X |
N/A |
N/A |
N/A |
3596X |
||||
3597X |
||||
3598X |
||||
3686X |
||||
3687X |
||||
3710X |
||||
3721AX |
||||
3726X |
||||
3758X |
||||
3774X |
||||
3800X |
Benefits
-
Increases fuel mileage
-
Increases tire life
-
Stops tire vibration
-
Stops irregular tire wear
-
Cuts rebalancing costs
-
Decreases tire maintenance
-
Reduces tire cupping
-
Reduces "wheel off" condition
Applications
- Motor Coaches
- Semi Trucks and Trailers
- Heavy Duty Trucks
- School Busses
- Commercial Busses
- Parcel Package Trucks
- Emergency Vehicles
Install Instructions:
-
Jack up vehicle until the tire is off the ground.
-
Remove wheel and brake drum.
-
Clean wheel studs thoroughly with our wire brush part #TRU-X-1755-WB.
-
Thread 3 sleeves onto the wheel at the 12, 4 and 8 o'clock positions.
-
The squared shoulder centers the brake drum and should seat directly against the hub face.
-
Slide brake drum over studs and onto the sleeves.
-
Your drum should now be centered and not move. (Make sure the squared portion of the sleeve and brake drum are flush with each other)
-
Slide the wheel over the studs and onto the remaining smooth shoulder.
-
Your wheel is now centered.
-
Replace all lug nuts starting with the studs that have the sleeves on and tighten according to the manufacturer's specifications.